Zortrax M300 Dual

Smart and efficient large-volume 3D printing. The LPD Plus technology designed for BIG industrial -grade results.

Print as you want – Various types of build platforms and a wide range of third-party filaments are fully supported. Not being limited to a single supplier allows choosing the setup perfectly tailored to the task at hand.

Minimizing human error – The M300 Dual is an efficient time-saving device fitted with advanced sensors to oversee the 3D printing process from start to finish with almost no supervision required.

No more failed prints – The printer can reduce time lost due to power outages and various kinds of mechanical failures. In such cases the print is automatically paused and can be resumed right after the issue has been dealt with.

Rafał Tomasiak, CEO of Zortrax, explains “The dual-extrusion system and large workspace allow industrial-standard detailed and complicated printing, while maintaining the characteristics of a desktop printer.

Our goal is to transfer the possibilities offered by an industrial printing to smaller, more user-friendly devices. The new m300 dual is another step in this direction.”


Industrial-quality results from desktop 3D printer.

  • Large workspace – Its large workspace measuring 265x265x300 mm is sufficient to print big models in one go.
  • Dual-extrusion system – The LPD Plus technology works with two nozzles and a double hot-end.
  • Blackout response system – The M300 Dual can detect a power outage and resume the printing from the same spot when the power is back on.
  • Capacitive sensor – The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.
  • Advanced filament control – The M300 Dual automatically pauses the print when the filament’s jammed, run out, or when the nozzle got clogged.
  • External materials support – Third-party filaments available on spools are fully supported in both single and dual extrusion modes.

Large format models made with a desktop-sized 3D printer.

Scaling up to 3D printing farms

The Zortrax M300 Dual’s wireless connectivity enables you to build a large cluster of remotely controlled 3D printers. Besides Wi-Fi, multiple M300 Dual 3D printers can also be networked through Ethernet or USB ports.

  • Connect – 3D printing networks can be made by connecting multiple printers into large manufacturing clusters.
  • Manage – Z-SUITE is an efficient 3D printing farm management tool. 3D printers can be chosen to divide the workload between the devices.
  • Check – Monitor the 3D printing process using cameras installed inside each one of the printers.


Main features of Z-SUITE 2 for dual-extrusion technology

Z-SUITE is a dedicated slicing application that also works as a wireless command center of smart, reliable Zortrax 3D printers with Wi-Fi capability. It has a variety of functionalities enhancing the experience of using Zortrax M300 Dual.

  • Raft-free 3D printing – Z-SUITE 2 supports raft-free 3D printing. A glass build platform is recommended for this option.
  • Rotation optimization tool – The model’s position on the build-platform can be optimized to reduce support or printing time.
  • Replication – Models can be easily replicated to fit multiple parts of the same design on the build platform.
  • Thin wall detection – Z-SUITE 2 highlights the walls too thin to be printed properly to prevent failed prints.

Download parts from the Zortrax Parts Library

See the smaller Zortrax M300 3D printer

Buy Online (Free Shipping to your Door)

Zortrax M200 has been voted by users on 3DHubs as the best Prosumer desktop 3D printer above the Ultimaker and Makerbot 3D printers. The M300 Plus is based on this award winning technology.


Timelapse of 3D Printing Without Raft on Zortrax M300 Dual - youtube Video

Product Detail

Specification for Zortrax M300 Dual

Device features

Build volume 265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in)
Material container Spool
Material diameter 1.75 mm (0.069 in)
Nozzle diameter 0.4 mm (0.016 in)
Connectivity Wi-Fi, Ethernet, USB
Extruder Dual material extruder with material jam detection
Extruder cooling system Two fans cooling the extruder; radial fan cooling the print
Hotend Dual material hotend
Material runout 2 x Mechanical
Build Plate Heated; Perforated/Glass
Support Mechanicaly removed
Filaments for Single Extrusion Z-NYLON, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA
Filaments for Dual Extrusion Z-PETG, Z-PLA, Z-ULTRAT PLUS, Z-SUPPORT PREMIUM
External materials Applicable
Support Mechanically removed – printed with the same material as the model / Dissolvable – printed with a different material than the model
Platform levelling Automatic measurement of platform points’ height
Touchscreen 4″ IPS 800 x 480
Camera Yes
In the box 3D Printer, Side Covers, Z-SUITE, Starter Kit, 1 spools of model material, 1 spool of support material, 2 spoolholders, Material Box, 1 perforated platform, 1 glass platform


Technology LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures
Layer resolution 100 – 300 microns (for 0.4 mm 0.016 in nozzle)
Minimal wall thickness 400 microns (for 0.4 mm 0.016 in nozzle)
Platform leveling Automatic measurement of platform points height / manual measurement of platform points height
Processor Quad Core
Operation system Android
Maximum platform temperature 105° C (221° F)
Ambient operation temperature 20 – 30° C (68- 86° F)
Storage temperature 0 – 35° C (32- 95° F)
AC input 110 V ~ 5,9 A 50/60 Hz
240 V ~ 2,5 A 50/60 Hz/td>
Maximum power consumption 400 W


Software bundle Z-SUITE 2.0
Supported file types .stl, .obj, .dxf, .3mf
Supported operating systems Mac OS X / Windows 7 and newer versions
Output format ZCODEX
* It should be noted that the model’s dimensions strongly depend on the technical condition of the printer as well as the shape, form and size of a print, the material used and the printing process conditions. The accuracy in Z-axis does not include a tolerance of +/- one layer. Bear in mind errors of measurement and measuring equipment.
** measurements were taken with an angle of 90˚.

3D Printer Industries

Benefit from 3D printing in your industry!


Build your idea big. Thanks to 3D printing, you can make your architectural models fast, in high quality, and with attention to the finest details.


Accelerate the automotive design process and test your idea more thoroughly. Speed up the design first, then add the tempo to your business.


Make your concept worth paying attention because of the idea behind it, not the prototyping process. With 3D printing, you can significantly shorten and improve the creating process in-house.


Life-saving solutions can be made in-house. Start from prototyping solid, high quality and accurate models that fit the needs of individuals. Make your contribution to the today’s medicine.


Tomorrow’s change starts today. Apply 3D printing to robotics and create functional prototypes and movable constructions that reflect the properties of modern industrial tools.


Add the sparkle of modern to the learning process. 3D printers can help students in better understanding the abstract models and let them grow their own interest in the new technologies.

Zortrax Owner Reviews

Superb. I’ve owned this printer since September 2014. I’d say it’s had two weeks downtime in all that time. The rest of the time, it’s printing. It’s built like a tank and just works. Print failures are incredibly rare, and entirely down to my own errors such as running out of filament.

Totally awesome printer. True plug&play experience. IMO best printer available for education and professional working environment. The only problem is with printing large objects – they often tend to warp.

The zortrax m200 is the best printer I have ever used. Print quality, affordability and style make it an awesome choice. Very easy to learn and print on.

The Zortrax M200 is an excellent value that makes the 3D printing experience simple and productive. It is also a quality printer for any person at any level of experience.

Excellent reliability, great prints. Almost no prints fail. Just load file and remove your print once it is done. Would recommend this printer to anyone who doesn’t want to make 3d printing a trial and error process.

We bought the Zortrax M200 printer after reading the reviews on 3dhubs and other platforms and were immediately impressed by it’s capabilities. It continues to live up to it’s well deserved reputation as an easy to use, reliable machine with great quality results. We use it regularly for all manner of customer and internal jobs. We actually have 3 M200’s in operation and currently we do not see any justifiable reason to buy another make of FDM printer.



Please contact me regarding this product

  • Please enter your phone number if you'd prefer someone call you regarding your request.
  • This field is for validation purposes and should be left unchanged.


Comments are closed.